Instantly give your home a festive look by installing this Christmas garland on your fireplace mantel. Don’t have a fireplace? Simply hang it on a wall, above a credenza!
Materials
10 pine cones
10 evergreen branches
Acrylic paint (your choice of colour)
1 pack eye screws at least ¾” in diameter
Ribbon or rope about 2 metres in length to hang pine cones
Ribbon to make decorative bows (optional)
Drill and bit the same diameter or slightly larger than eye screws
Galvanized wire or cable ties (tie wraps)
Temporary hooks
Instructions
1. Using a drill, drill holes the size of the eye screws into the centre of the pine cones.
2. Insert the eye screws into the holes.
3. Using a clean brush, paint the bottom half of a pine cone. Repeat with each cone. Let dry at least one hour before handling.
4. Meanwhile, form two bunches of greenery by tying a few evergreen branches together with cable ties or galvanized wire.
5. Thread the main ribbon through the eyelets of four pine cones and position them at the centre of the ribbon.
6. Next, form two bunches of three pine cones by threading galvanized wire through their eyelets. Assemble the evergreen branches and pine cones with the same type of wire.
7. Hang the main ribbon on temporary hooks you’ve placed on the fireplace mantel or a wall, above a credenza.
8. Attach the two bunches of evergreen branches on the hooks and camouflage the galvanized wire with decorative bows or tape.